The HPA V280 was developed with the aim of ensuring the highest transmission quality on low-, medium- and high-impedance headphones. These can also be symmetrical! Like its "big brother" (HPA V281), the HPA V280 also uses our acclaimed V200 amplifier technology for a neutral but still unusually warm playback.

 

-4 power amplifiers with V200 technology

-1 sym. Headphone jack, 4-pin XLR

-2 unsym. Headphone connections

- lowest noise

- highest output voltage (60 Volt internal operating voltage)

- strongest output (best suited for low-impedance headphones - also magnetostats)

- highest damping factor

- Pre-gain (5-fold pre-amplification)

- Channel-separated structure

- DC coupled (can be switched off)

- ALPS RK27 high-grade volume control

- High Quality OpAmps in the signal path

- High quality MKP capacitors in the signal path

- 0.1% and 1% metal film resistors throughout the device

- Discretely constructed power amplifiers with 8 transistors per channel

- 2 headphone jacks, Neutrik, silver plated

- Delayed connection / disconnection of the headphone connections via relay

- two toroidal transformers

- High sieve capacity in the power supply

- Ground lift switchable

 

Optionally 6 different digital inputs are available:

Coaxial, Optical or USB with up to 96 kHz or 192 kHz Sampe rate.

 

The HPA V280 can be equipped with one of 6 different digital inputs:

Coaxial, Optical or USB with up to 96 kHz or 192 kHz Sampe rate

 

The color of the housing feet is optional. Please select the color as an accessory.

HPA V280

Farbe
    • balanced inputs via XLR, Neutrik, gold-plated
    • unbalanced inputs via cinch, ALPS, gold-plated

    • unbalanced outputs via cinch, ALPS, gold-plated

    • optional digital input 2 headphone jacks, Neutrik, silver plated

    • 1 headphone jack, Neutrik, 4-pin XLR, gold-plated

    • Discrete output stages with 16 transistors per channel

    • High quality MKP capacitors in the signal path

    • High Quality OpAmps in the signal path

    • ALPS RK27 high-grade volume control ALPS RK27

    • High Grade Balance Regulator delayed connection of the headphone connections via relay

  • In-/Output: 2 / 0 channel (sym. XLR), 2 / 2 channel (unsym. RCA)
    Haedphoneoutput: 1 (sym., XLR 4-Pol), 2

    Amplifier

    channels:

    4

    Frequency

    response:

    0 Hz - 60 kHz (-0,5 dB)
    Eingangsempfindlichkeit: +6 dBu

    Input

    impedance:

    10 kOhm

    Output

    impedance:

    0,165 Ohm (unsym.)

    max. input

    level

    +21 dBu

    max.output

    level:

    1800 mW (600 Ohm) _ 5300 mW (100 Ohm) _ 3100 mW (50 Ohm) _ 2600 mW (32 Ohm) _ 1500 mW (16 Ohm)
    Noise ratio (SNR): >129 dB (A-gew.)

    THD+N

    (@ -1 dBFs)

    < -102 dB / < 0,0008 %
    Crosstalk: -115 dB
    Extras: optional digital input and remote control available
    Stromversorgung: 230 V / 115 V AC
    Casing: desktop
    Dimensions 170 x 49 x 320 mm (WxHxD)

    Color:

    silver

LAKE PEOPLE electronic GmbH

Turmstrasse 7a

78467 Konstanz

© 2018 LAKE PEOPLE electronic GmbH

IMPRINT